HI-935004P T-type Thermocouple Thermometer for the Food Industry

HI-935004 is a thermometer that includes a T-type thermocouple stainless steel

replaceable style penetration probe (FC767PW). This thermometer offers temperature

measurement from -50 to 300°C.

Standard features include waterproof casing and stainless steel penetration probe for

measurements in semi-solid food, liquids or pastes. HI-935004 also includes features

such as CAL check, low battery detection, auto-off capability, and long battery life.

• T-type Connection
• -50°C to 300°C

Descriptions

CAL Check™ Feature

The HI-935004 includes Hanna€˜s exclusive CAL Check™ technology. CAL Check™ allows the

user to check calibration status. If the meter is calibrated, the display will

automatically show “0.0°C” during startup.

Low Battery Indicator

The included AAA batteries provide 3500 hours of continuous use. When the battery level

is below 10%, a warning symbol will blink to indicate low battery condition. When low

battery power may affect your results, the meter will shut down to avoid erroneous

readings caused by low battery level.

Automatic Shut-off

The auto-off feature can be set to shut the meter off at 8 or 60 minutes, or it can be

disabled so that the meter continuously stays on. The auto-off feature prolongs battery

life for peace-of-mind and energy savings if the meter is accidentally left on.

Built to be Durable

Waterproof casing and optional shockproof rubber boot offers maximum protection for a

durable thermometer than can handle any environment.

Portable Design

Made to fit comfortably in your hand for on-the-go testing, the large LCD display

provides at-a-glance readings from any angle.

Single Button Operation

With single button operation, temperature measurements could not more simple. This

single button turns the meter on and off and allows you to cycle through options when in

Setup Mode.

Completely Interchangeable Probes

The HI-935004 works with a wide range of thermistor probes with T-type connection,

including an assortment of specially engineered HI-767 probes, so you can get the right

probe for your needs.

Supplied with the FC767PW

The FC767PW is a rugged penetration probe designed for general use. The stainless steel

probe is both durable and easy to clean, the perfect combination to meet the tough

environment encountered in the food sector.

NIST Traceable Calibration Service

This meter can be provided with a calibration certificate traceable to the National

Institute of Standards and Technology (NIST) upon request. Traceability to NIST makes it

possible to achieve the highest levels of measurement quality and productivity.

Specifications
T-Type Thermocouple Temperature Range	-50.0 to 199.9 °C ; 200 to 300°C -58.0 to 399.9 °F ; 400 to 572°F
T-Type Thermocouple Temperature Resolution	0.1°C (up to 199.9°C) / 1°C (outside) 0.1°F (up to 399.9 °F) / 1°F (outside)
T-Type Thermocouple Temperature Accuracy	±0.4°C (-50.0 to 300°C) ±0.7°F (-58.0 to 572°F)
Thermometer Probe	FC767PW penetration, T-type thermocouple probe w/1 m (3.3€™) white cable & white handle

General meter:
Automatic Shut-Off	User selectable: 8 min, 60 min or disabled
Battery Type / Life	1.5V AAA (3) / approximately 3500 hours of continuous use
Environment	-20 to +50°C (-4 to 122°F); RH max 100% (Storage Temperature: -40 to 70°C (-40 to 158°F))
IP Rating	IP65
Dimensions	140 x 57 x 28 mm
Weight	178 g
Ordering Information	Meter is supplied complete with: temperature probe, batteries (3), quick reference guide, and instruction manual.
Warranty	2 year (limited)

Please call for more information