HI-935001P Foodcare K-Type Thermocouple Thermometer with Interchangeable

Probe

Designed with user functionality and performance in mind, the HI-935001 is a

waterproof K-Type thermocouple thermometer that measures temperature from –

50.0 to 300°C (-58.0 to 572°F ). The included batteries provide up to 3500

hours of continuous use. CAL Check™ and the Battery Error Prevention System

(BEPS) ensure the highest level of accuracy and confidence. The probe is

replaceable and works with an assortment of specialised probes. This meter

can be certified as traceable to NIST standards upon request.

• ±0.4°C/±0.7°F accuracy
• Enable automatic shut off after 8 minutes, 60 minutes, or

  disabled

• Perfect for use in industrial kitchens for wash-downs and cleaning of

  food processing equipment, as well as food packaging

Descriptions

CAL Check™ Feature

The HI-935001 includes Hanna€˜s exclusive CAL Check™ technology. CAL Check™

allows the user to check calibration status. If the meter is calibrated, the

display will automatically show “0.0°C” during startup.

Low Battery Indicator

The included AAA batteries provide 3500 hours of continuous use. When the

battery level is below 10%, a warning symbol will blink to indicate low

battery condition. When low battery power may affect your results, the meter

will shut down to avoid erroneous readings caused by low battery level.

Automatic Shut-off

The auto-off feature can be set to shut the meter off at 8 or 60 minutes, or

it can be disabled so that the meter continuously stays on. The auto-off

feature prolongs battery life for peace-of-mind and energy savings if the

meter is accidentally left on.

Built to be Durable

Waterproof casing and optional shockproof rubber boot offers maximum

protection for a durable thermometer than can handle any environment.

Portable Design

Made to fit comfortably in your hand for on-the-go testing, the large LCD

display provides at-a-glance readings from any angle.

Single Button Operation

With single button operation, temperature measurements could not more

simple. This single button turns the meter on and off and allows you to

cycle through options when in Setup Mode.

Completely Interchangeable Probes

The HI-935001 works with a wide range of thermocouple probes, including an

assortment of specially engineered HI-766 probes, so you can get the right

probe for your needs.

Supplied with the FC766PW

The FC766PW is a rugged penetration probe designed for general use. The

stainless steel probe is both durable and easy to clean, the perfect

combination to meet the tough environment encountered in the food sector.

NIST Traceable Calibration Service

This meter can be provided with a calibration certificate traceable to the

National Institute of Standards and Technology (NIST) upon request.

Traceability to NIST makes it possible to achieve the highest levels of

measurement quality and productivity.

Specifications
K-Type Thermocouple Temperature Range	-50.0 to 199.9 °C ; 200 to 300°C -58.0 to 399.9 °F ; 400 to 572°F
K-Type Thermocouple Temperature Resolution	0.1°C (up to 199.9°C) / 1°C (outside) 0.1°F (up to 399.9 °F) / 1°F (outside)
K-Type Thermocouple Temperature Accuracy	±0.4°C (-50.0 to 300°C) ±0.7°F (-58.0 to 572°F)
Thermometer Probe	FC766PW penetration, K-type thermocouple probe w/1 m (3.3€™) white cable & white handle

General meter:
Automatic Shut-Off	User selectable: 8 min, 60 min or disabled
Battery Type / Life	1.5V AAA (3) / approximately 3500 hours of continuous use
Environment	-20 to +50°C (-4 to 122°F); RH max 100% (Storage Temperature: -40 to 70°C (-40 to 158°F))
IP Rating	IP65
Dimensions	140 x 57 x 28 mm
Weight	178 g
Ordering Information	Meter is supplied complete with: temperature probe, batteries (3), quick reference guide, and instruction manual.
Warranty	2 year (limited)

Please call for more information