HI-935008 T-type Thermocouple Thermometer with fixed probe

Designed with user functionality and performance in mind, the HI-935008 is a waterproof T-type

thermocouple thermometer that measures temperature from -50.0 to 300°C (-58.0 to 572°F). The

included batteries provide up to 3500 hours of continuous use. CAL Check™ and the Battery

Error Prevention System (BEPS) ensure the highest level of accuracy and confidence. This meter

can be certified as traceable to NIST standards upon request.

• ±0.5 °C/ ±0.9 °F system accuracy
• Enable automatic shut off after 8 minutes, 60 minutes, or disabled
• Perfect for use in coffee and chocolate production, deep-frozen food, and instances when

  moisture is present.

Descriptions

CAL Check™ Feature

The HI-935008 includes Hanna€˜s exclusive CAL Check™ technology. CAL Check™ allows the user to check calibration status. If the meter is calibrated, the display will automatically show “0.0°C” during startup.

Low Battery Indicator

The included AAA batteries provide 3500 hours of continuous use. When the battery level is below 10%, a warning symbol will blink to indicate low battery condition. When low battery power may affect your results, the meter will shut down to avoid erroneous readings caused by low battery level.

Automatic Shut-off

The auto-off feature can be set to shut the meter off at 8 or 60 minutes, or it can be

disabled so that the meter continuously stays on. The auto-off feature prolongs battery life

for peace-of-mind and energy savings if the meter is accidentally left on.

Built to be Durable

Waterproof casing and optional shockproof rubber boot offers maximum protection for a durable

thermometer than can handle any environment.

Portable Design

Made to fit comfortably in your hand for on-the-go testing, the large LCD display provides

at-a-glance readings from any angle.

Single Button Operation

With single button operation, temperature measurements could not more simple. This single

button turns the meter on and off and allows you to cycle through options when in Setup Mode.

Supplied with Fixed Probe

The HI-935008 is supplied with a fixed rugged penetration probe designed for general use. The stainless steel probe is both durable and easy to clean, the perfect combination to meet the tough environment encountered in the food sector.

Supplied with the FC766PW

The FC766PW is a rugged penetration probe designed for general use. The stainless steel probe

is both durable and easy to clean, the perfect combination to meet the tough environment

encountered in the food sector.

NIST Traceable Calibration Service

This meter can be provided with a calibration certificate traceable to the National Institute

of Standards and Technology (NIST) upon request. Traceability to NIST makes it possible to

achieve the highest levels of measurement quality and productivity.

Shockproof rubber boot (buy separately)

Optional HI-710026 blue Shockproof rubber boot offers maximum impact protection.

Specifications
T-Type Thermocouple Temperature Range	-50.0 to 199.9 °C ; 200 to 300°C -58.0 to 399.9 °F ; 400 to 572°F
T-Type Thermocouple Temperature Resolution	0.1°C (up to 199.9°C) / 1°C (outside) 0.1°F (up to 399.9 °F) / 1°F (outside)
T-Type Thermocouple Temperature Accuracy	±0.5°C (-50.0 to 300°C) ±0.7°F (-58.0 to 572°F)
Thermometer Probe	Fixed T-type thermocouple probe w/1 m (3.3€™) white cable & white handle

General meter:
Automatic Shut-Off	User selectable: 8 min, 60 min or disabled
Battery Type / Life	1.5V AAA (3) / approximately 3500 hours of continuous use
Environment	-20 to +50°C (-4 to 122°F); RH max 100% (Storage Temperature: -40 to 70°C (-40 to 158°F))
IP Rating	IP65
Dimensions	140 x 57 x 28 mm
Weight	178 g
Ordering Information	Meter is supplied complete with: temperature probe, batteries (3), quick reference guide, and instruction manual.
Warranty	2 year (limited)

Please call for more information