HI-98131 GroLine Hydroponic Waterproof Pocket pHECTDSTemperature

£199.80 £239.76 (Inc. VAT)

999 in stock

Product Description

HI-98131 GroLine Hydroponic Waterproof Pocket pHECTDSTemperature Tester

The HI-98131 is a slim, lightweight, and waterproof pocket tester that measures pH, conductivity, TDS and temperature. This versatile pocket meter is designed for hydroponics, greenhouse and agriculture applications.

Descriptions

The meter operation is simplified with two buttons. One is used for on/off and for calibration while the other is used to switch between the measurement modes. The HI-98131 has advanced features including a selectable EC to TDS conversion factor (0.5 – 500 ppm and 0.7 – 700 ppm).

The HI-98131 GroLine tester features a large multi level LCD which displays both pH, EC or TDS and temperature readings simultaneously. The pH readings are displayed with a 0.01 resolution, while the EC and TDS readings are displayed with a 0.01 mS/cm and 10 ppm (mg/L) resolution.

An exposed temperature sensor allows for rapid temperature compensated measurements of EC and TDS. The LCD screen has indicators for calibration status and stability. The battery percent level is displayed at start up alerting the user to the remaining battery power that is available.

Key Features

3 sensors in a single meter
Waterproof – Designed to withstand the humidity of a growing environment
Wide pH Range from 0.00 to 14.00 pH
Selectable EC to TDS conversion factor
Automatic Temperature Compensation
Stability indicator
HOLD button that freezes reading on the display to allow recording of measurement
BEPS (Battery Error Prevention System)
Battery % level at startup
Low Battery Indicator
Auto-off
Replaceable electrode

Technical Data
Range	pH 0.00 to 14.00 pH
	Conductivity 0.00 to 6.00 mS/cm
	TDS 0 to 3000 ppm (500 CF); 0 to 3999 ppm (700 CF)
	Temperature 0.0 to 60.0°C
Resolution	0.01 pH
	Conductivity 0.01 mS/cm
	TDS 10 ppm (mg/L)
	Temperature 0.1°C
Accuracy	pH ±0.1 pH
	Conductivity ±2% F.S.
	TDS ±2% F.S.
	Temperature ±0.5°C
pH Calibration	pH: automatic; EC/TDS: automatic with Î² set at 1.9%/°C
Temperature Compensation	automatic, one or two points with three standard buffers available (pH 4.01, 7.01 and 10.01)
Battery Type/Life	1.5V (4) / approx. 100 hours of continuous use, auto-off after 8 minutes of non-use
Environment	-5 to 50°C; RH max 100%
Weight	100g
Dimensions	163 x 40 x 26 mm
Ordering Information	HI-98131 is supplied with HI-73127 pH electrode, HI-73128 electrode removal tool, batteries (4), instructions and quality certificate.